Gutter Systems

Fab 24 manufacture and supply a comprehensive range of gauge metal gutters and accessories to compliment every type of building design and construction. The options available include single skin and composite gutters in membrane lined aluminium and galvanised steel, plain aluminium and galvanised steel with traditional joggle joints. There are also various options in both pre-coated aluminium and steel, as well post coated finishes in aluminium and steel.

Membrane Lined Single Skin and Composite Gutters

Manufactured from 1.2mm, 1.5mm galvanised steel and 2mm aluminium sheet with a 1.2mm PVC membrane fully bonded to the water carrying surface. Composite membrane gutters are bonded with a polyisocyanurate rigid insulation board. The thickness of which is optional and is determined by the specific ā€œUā€ value to be achieved. The rigid insulation is clad with an internal gauge metal liner, the material and finish of which is optional and dependent on specification. The dry jointing of the mating lengths is straightforward and is carried out using established and proven methods for the jointing of single ply PVC membranes by hot air welding and seaming techniques that give excellent water-tight results.

Standard Single Skin and Composite Gutters Gutters

Manufactured from 1.2mm, 1.5mm, 2mm, and 3mm galvanised steel and aluminium sheet. Gutters are supplied pre-punched, and with a formed joggle joint. Composite gutters are supplied pre-punched, with a formed joggle joint and captive nutserts fitted. The gutters are bonded with a polyisocyanurate rigid insulation board. The thickness of which is optional and is determined by the specific ā€œUā€ value that has to be achieved. The rigid insulation is clad with an internal gauge metal liner, the material and finish of which is optional and dependent on specification. All bolts, nuts, washers and butyl strip mastic are supplied with the gutter package.

Feature Fascia Gutters

Manufactured from 1.5mm, 2mm 3mm aluminium sheet. Feature Fascia gutters can be aerofoil, bullnose, ogee or bespoke in section. The method of jointing the mating lengths is normally with an internal butt strap which, once assembled offers clean, uninterrupted lines along the length of the building. The Feature Fascia gutters are generally post powder coated after manufacture in a contrast colour to compliment the main cladding.

Trimline Gutter

Manufactured from 0.7mm pre-coated steel or 0.9mm pre-coated aluminium. Trimline gutters offer a competitively priced gutter manufactured from a similar material specification to that of the main cladding. The method of jointing the mating lengths is normally with an internal butt strap which, once assembled offers clean, uninterrupted lines along the length of the building.